Polyurethane Sealant For Automotive Glass LW-S10

Delivery term:The date of payment from buyers deliver within days
  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Beijing

  • Validity to:

    Long-term effective

  • Last update:

    2017-09-08 09:37

  • Browse the number:

    661

Send an inquiries
+
Beijing Langwei Times Technology and Science Co.,Ltd
Contactaixin:

Contactaixin:

langwei(Mr.)  

Email:

telephone:

phone:

Area:

Beijing

Address:

Roo 503, 4a Modern Zone No.16, Baiziwan Road Chaoyang District, Beijing, (100022) China

Website:

http://www.lwconchem.com/ http://langwei.bje-jia.com/

+


Polyurethane Sealant For Automotive Glass LW-S10

 

Product Features:

Ø One-component polyurethane sealant;

Ø Medium-High strength, medium-high modulus;

Ø Moderate viscosity, good thixotropy;

Ø Convenient construction.

Ø High adhesive  and good flexible sealing performance after curing.

 

Technical Data:

Appearance

Black,

Homogeneous paste

Tack free time       

20min80min

Curing speed        

≥3.0mm/24h

Non-volatile matter content

≥96%

Shore A-hardness    

4060

Tensile-shear strength

≥2.5MPa

Tensile strength       

3.0MPa

Elongation at break     

≥400%

Tear strength       

7.0N/mm

Density        

1.20±0.10g/cm3

Low temperature flexibility      

                            -40℃ Flawless

Shelf life

(15℃~25℃,≤50%RH)

Rigid packaging:12months

Sausage & plastic drum: 9months

① Standard conditions: temperature 23℃±2℃, relative humidity 50%±5%RH

 

 

Application:

Suitable for permanent adhesive elastic seal for general adhesive strength. Such as small auto windshield glass bonding, bus covering bonding, car windshield maintenance etc. Applied to substance such as glass, stalinite, iron and steel, Aluminum Alloy (including painted alloy).

 

Construction Guide:

1.Surface cleaning:

Bonding surface should be clean, dry, no grease and dust. If the surface is easy to rust, which should be in advance cleaned away by metallic brush. If necessary, should use acetone and other organic solvents to clean.

2. Construction:

Barrel packaging: Opened the cover. Pierce the membrane at the nozzle,screw on the nozzle,place the barrel in an applicator glue gun and squeeze the trigger;

Sausage packaging: a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun;

Big barrel:according to the extrusion and coating equipment and pump;

According to construction requirements, cut nozzle into appropriate shapes, after the glue adhesive, frictioning,screeding and other truing work should be finished in tack free time.

 

Packaging Information:


        Rigid tubes packaging

        310ml

      Sausage packaging

      400ml, 600ml

    Plastic drum packaging

    5Gallon(24KG)

   55Gallon(240KG)

 

Notes:

1. Ambient temperature under 10 ℃ or the output speed can not meet the technical requirements, the pens packaging is advised to oven bake for 1h-3h in 40 ℃ ~ 60 ℃.

2. In order to ensure the sealing blazonry, recommended before gluing stick protective tape.

3. Spray paint after drying, compatibility test should be done before painting.

4. The best construction environment: temperature 15 ℃ ~ 30 ℃, relative humidity 40% ~ 65% RH.

5. To ensure a good adhesive sealing effect and the compatibility of products and base material, should test with the actual experiment base material in the corresponding environment.

6. Keep away from children.

7. Avoid contacting with eyes and skin.Of contact with the skin,in case of eyes and skin contact, wash immediately and thoroughly with soap and water. Seek medical advice immediately if it is serious.

 

Storage & Transportation:

Transportation: moisture-proof, anti rain, sunscreen, anti high temperature, away from heat source, handle with care, squeezing and collision are not allowed.

Storage: sealed and stored in low temperature and dry place, Advise storage in 5-25℃, humidity ≤50%RH.

 

LW-S10 PU sealant is suitable for permanent adhesive elastic seal for general adhesive strength. Such as small auto windshield glass bonding, bus covering bonding, car windshield maintenance etc. Applied to substance such as glass, stalinite, iron and steel, Aluminum Alloy (including painted alloy). PU sealant  has better performance with Moderate viscosity, good thixotropy, High adhesive  and good flexible sealing performance after curing.